Not yet registered?
If you forgot your ID or password, click here.
Company
Name
Password
Country
Address
Tel. No.
Email
Products
Description
Sensor, Proximity Sensor, Photo sensor,Temperature Controller, Counter, Timer - Autonics-241
Controllers
Controllers are widely used in industrial control systems to adjust or maintain desired outputs of specific processes within a desired range. Autonics provides a diverse range of highly accurate and reliable controllers for ideal system control.
CTY/CTS/CT Series Print
Controllers
Programmable counter/timers
New CT series adopts RS 485 communication function so that each parameter setting and monitoring can be available from PC. In addition, it allows up to 6 digit prescale setting possible to provide user convenience. Increased contact capacity of load to 5A and new design nameplate are another features of NEW CT series. ( ※ NOTE that existing CT series will be discontinued. )

Product Detail Data sheet 2D/3D CAD Data

Main features

● Available to set 6 digits(0.00001 to 999999) prescale value(4digit : 0.001 to 9999)
● Built-in Modbus communication function(Communication model)
● Available to set the One-Shot output time in 10ms.(0.01sec. to 99.99sec.)
● Increase contact capacity to 5A(CTS, CTM Series)
● Available to set Count Start Point.(Initial value)
● Improved to select memory protection function in the indicator
● Added BATCH counter function(CTM Series)
● Added Counter Up-1 / Up-2 / Down-1 / Down-2 input modes
● Added Counter TOTAL / HOLD operation modes in the indicator
● Added Timer TOTAL / HOLD / On Time Display operation modes in the indicator
● Added Timer INT2 / NFD / NFD.1 / INTG output modes
● Added Timer range 999.999s / 9999m59 / 99999.9h



Ordering Information




Specification Table

Series CTS CTY CTM
Digit 4 6 6 6
Model Dual Preset CT4S-2P□□ CT6S-2P□□ CT6Y-2P□□ CT6M-2P□□
Sinqle Preset CT4S-1P□□ CT6S-1P□□ CT6Y-1P□□ CT6M-1P□□
Indicator - CT6S-1□□ CT6Y-1□□ CT6M-1□□
Digit Size Count value 11mm 10mm 10mm 13mm
Preset value 8mm 7mm 7mm 9mm
Power Supply AC Power 100-240VAC 50/60HZ
AC/DC Power 24VAC 50/60HZ / 24-48VDC
Allowable voltage range 90 to 110% of rated voltage(AC Power type)
Power consu- mption AC Power Max. 12VA
AC/DC Power AC: Max. 10VA / DC: Max. 8W
INA/INB Max. counting speed Selectable 1cps / 30cps / 1kcps / 5kcps / 10kcps
Min. input
signal
width
Counter Reset signal : Selectable 1ms, 20ms
Timer INA, INB RESET : Selectable 1ms, 20ms INA, INH, RESET, INHIBIT, BATCH
RESET : Selectable 1ms, 20ms
Input Selectable voltage input or No-voltage input
[Voltage input] Input impedance is 5.4kΩ, 'H' level : 5-30VDC, 'L' level : 0-2VDC
[No-voltage input] Short-circuit impedance : Max. 1kΩ, Residual voltage : Max. 2VDC
One-shot output Count, timer : Selectable 0.01s to 99.99s
Control output Without com. Contact output Dual preset : SPST(1a) 2EA
Single preset : SPDT(1c) 1EA
Dual preset : SPST(1a) 1EA, SPDT(1c) 1EA
Single preset : SPDT(1c) 1EA
Solid state output Dual preset : 1NPN open collector
Single preset : 1NPN open collector
Dual preset:3NPN open collector
Single preset:2NPN open collector
Com. Contact output Dual preset : SPST(1a)2EA
Single preset : SPDT(1c)1EA
Dual preset: SPSTMa), SPDT(1c)
Single preset: SPDT(1c)
Solid state output - Dual preset: -
Sinqle preset:1NPN open collector
Dual preset:2NPN open collector
Sinqle preset:2NPN open collector
Capacity Contact output 250VAC 5A resistive load 250VAC 3A resistive load 250VAC 5A resistive load
Solid state output 30VDC Max. 100mA Max.
External sensor power 12VDC ±10%, 100mA Max.
Memory retention 10years(When using non-volatile semiconductor memory type)
Timer Repeat error Power ON Start : Max. ±0.01% ±0.05 sec
Signal Start : Max. ±0.01% ±0.03 sec
SET error
Voltage error
Temperature error
Insulation resistance Min. 100MΩ(500VDC Megger)
Dielectric strength 2.000VAC 50/60Hz for 1 minute
Noise strength (AC Power) ±2kV the square wave noise(pulse width:1㎲) by the noise simulator
Vibration Mechanical 0.75mm amplitude at frequency of 10 to 55(for 1 min.)Hz in each of X, Y, Z directions for 1 hour
Malfunction 0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes
Shock Mechanical 300m/s²(Approx. 30G) in each of X, Y, Z directions for 3 times
Malfunction 100m/s²(Approx. 10G) in each of X, Y, Z directions for 3 times
Relay Life cycle Mechanical Mln. 10,000,000 operations
Electrical Mln. 100,000 operations
Protection IP65(Front panel only)
Environ-ment Ambient temperature -10 to 55℃, storage : -25 to 65℃(at non-freezing status)
Ambient humidity 35 to 85%RH, storage : 35 to 85%RH(at non-freezing status)
Approval CE,UL
Unit weight Approx. 159g Approx. 149g Approx. 253g
※Environment resistance is rated at no freezing or condensation.


Dimensions




Connections




User's Guide




Caution for your safety