Ai-M-60SA-B - 2-Phase Closed Loop Stepper Motors with Built-in Brakes

Data sheet Print

Data sheet

Basic Step Angle [FULL/HALF]	1.8º/0.9º
Max. holding torque	11.22kgf.cm
Rotor Moment Of Inertia	240g·cm²
Winding Resistance	1Ω
Rated current	3.5A/Phase
Motor length	116.7mm
Shaft type	Single shaft
Operation method	Bipolar constant current Drive
Resolution	10,000PPR(2,500PPR×4-multiply)
Output phase	A, , B, , Z,
Max. response frequency	300kHz
Protection structure	IP30
Environment_Ambient temperature	0 to 50℃, storage: -20 to 70℃
Environment_Ambient humidity	20 to 85%RH, storage: 15 to 90%RH
Weight	Approx. 1.53kg (approx. 1.36kg)

※Built-in brake type 2-phase shaft type closed loop stepper motor (Ai-M-B Series) and built-in brake type 2-phase closed loop stepper motor driver (AiS-D-B Series) are available to order as a set (AiS-□-B).
※Max. holding torque is maintenance torque of stopping the motor when supplying the rated current (2-phase excitation) and is the standard for comparing the performance of motors.
※The weight includes packaging. The weight in parenthesis is for unit only.
※Environment resistance is rated at no freezing or condensation.

Used together with

• 

  PMC-1HS/2HS Series

  The PMC-1HS/2HS series high-speed programmable motion controllers are stand-alone controllers capable of 1 or 2-axis control. The controllers also feature high-speed processing up to 4 Mpps and 4 operation modes (scan, continuous, index, program). 64 steps of programming is possible with a combination of 12 control commands. Operation programming, parameter configuration and editing can be done easily with the dedicated software.

  Add to interested product(s)