ASL-L01SP1-PY - Solid State Relay Terminal Block (Tipe Screwless Push-In)

Data sheet Cetak

Data sheet

Kisaran tegangan	24VDC ±10%
Kisaran tegangan beban dan arus	75-240VAC~ 50/60Hz 2A
Konsumsi arus	≤ 18mA
SSR yang diaplikasikan	AQG22124(Panasonic)
Tipe terminal	Tanpa baut
Poros terminal	9.0mm(arranging over 2 units)
Indikator	LED Biru
Kabel yang digunakan_Solid wire	Ø0.6 ~ Ø1.25mm(hanya 60℃)
Kabel yang digunakan_kabel serabut	AWG22-16(0.3~1.25mm²)(hanya 60℃)
Ketahanan insulasi	≥ 1,000 MΩ (500 VDC megger)
Dielectric strength_Di antara coil-contacts	2,500VAC 50/60Hz selama 1 menit
Dielectric strength_di antara coil-contact yang sama	300VAC 50/60Hz selama 1 menit
Lingkungan_kadar suhu	-15 hingga 55℃, ruang tertutup: -25 hingga 65℃
Lingkungan_kadar kelembaban	35 ~ 85%RH, ruang tertutup: 35 ~ 85%RH
Material	Terminal block: polyamide 66, conducting plate: brass, case&base: poly phenylene sulfide
Aksesoris	Jumper bar: 1
Tingkat proteksi	IP20 (standar IEC)
Berat	Kurang lebih 140g (kurang lebih 22g)

※This is relay load capacity when it is resistive load and temperature characteristic curve is satisfied.
※The current consumption including LED current by one relay.
※When using stranded wire, use End Sleeve (ferrule terminal) crimp terminals.
※The weight of 1-point unit is per 4 units with packaging and the weight of parenthesis is per 1.
※Environment resistance is rated at no freezing or condensation.