TK4SP-14CN - Pengontrol Suhu PID Kinerja Tinggi

Data sheet Cetak

Data sheet

Metode tampilan	LED 4 digit 7-segmen
Metode kontrol	ON/OFF, P, PI, PD, PID
Spesifikasi Input	Thermocouple: K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT), G(TT), L(IC), U(CC), Platinel II RTD: DPt100Ω, DPt50Ω, JPt100Ω, Cu100Ω, Cu50Ω, Nikel 120Ω Analog: 0-100mV, 0-5V, 1-5V, 0-10V 0-20mA, 4-20mA
Siklus sampling	50ms
Output kontrol 1	Current(DC0/4-20mA) or SSR drive(11VDC ) [ON/OFF]
Pilihan output	Alarm 1
Catu daya	100-240VAC~ 50/60Hz
Tingkat proteksi	IP50(front panel)
Akurasi tampilan_RTD	•At room temperature(23℃±5℃):(PV ±0.3% or ±1℃, select the higher one) ±1-digit •Out of room temperature range:(PV ±0.5% or ±2℃, select the higher one) ±1-digit ※In case of TK4SP Series, ±1℃ will be added.
Akurasi tampilan_Thermocouple	•At room temperature(23℃±5℃):(PV ±0.3% or ±1℃, select the higher one) ±1-digit •Out of room temperature range:(PV ±0.5% or ±2℃, select the higher one) ±1-digit ※In case of TK4SP Series, ±1℃ will be added.
Akurasi tampilan_analog	•At room temperature(23℃±5℃): ±0.3% F.S. ±1-digit •Out of range of room temperature: ±0.5℃% F.S. ±1-digit
Tampilan akurasi_input CT	±5% F.S. ±1-digit
Histeresis (Sensitivitas dapat disesuaikan)	RTD/Thermocouples: 1 to 100℃/℉(0.1 to 100.0℃/℉) variable Analog: 1 to 100-digit
Pita proporsional	0.1 hingga 999.9℃/℉
Waktu integral	0 ~ 9999 detik
Waktu derivatif	0 ~ 9999 detik
Periode kontrol	Relay output, SSR drive output: 0.1 to 120.0 sec Current output or SSR drive output selectable: 1.0 to 120.0 sec
Reset manual	0.0~100.0%
Lingkungan_kadar suhu	-10 hingga 50℃, ruang tertutup: -20 hingga 60℃
Lingkungan_kadar kelembaban	35 ~ 85%RH, ruang tertutup: 35 ~ 85%RH
Tipe insulasi	Insulasi ganda atau insulasi yang diperkuat (mark: , dielectric strength di antara pengukuran bagian input dan bagian daya : 2kV)
Berat	Kurang lebih 130g (kurang lebih 85g)

※In case of TK4N, TK4SP, option output may be limited due to number of terminals.
※“S” represents SSR drive output support models which SSRP function (standard ON/OFF control, cycle control, phase control) are available. “C” represents selectable current and SSR drive output support models.
※Select "R" or "C" type in case of using heating&cooling control and "N" type in case of using standard control.
※CT input of TK4N is available only for the standard model which has alarm output 1.
※Sockets for TK4SP (PG-11, PS-11(N)) are sold separately.
※Display accuracy:
◎At room temperature (23℃±5℃)
• Thermocouple K, J, T, N, E type, below -100℃/Thermocouple L, U, PLⅡ type, RTD Cu50Ω, DPt50Ω: (PV ±0.3% or ±2℃, select the higher one) ±1-digit
• Thermocouple C, G, R, S type, below 200℃: (PV ±0.3% or ±3℃, select the higher one) ±1-digit
• Thermocouple B type, below 400℃: there is no accuracy standards.
◎Out of room temperature range
• RTD Cu50Ω, DPt50Ω: (PV ±0.5% or ±3℃, select the higher one) ±1-digit
• Thermocouple R, S, B, C, G type: (PV ±0.5% or ±5℃, select the higher one) ±1-digit
• Others, Below -100℃: within ±5℃
In case of TK4SP Series, ±1℃ will be added to the degree standard.
※The weight includes packaging. The weight in parenthesis is for unit only.
※Environment resistance is rated at no freezing or condensation.

Digunakan bersama dengan

• 

  Seri PG

  Soket controller seri PG digunakan dengan perangkat kontrol tipe plug Autonics dan menyediakan daya tahan dan konduktivitas listrik yang tinggi. Soket 8-pin tersedia dalam pemasangan standar, DIN/rail/panel, dan tipe pemasangan DIN rail mini dan soket 11-pin tersedia dalam tipe pemasangan standar dan DIN rail/panel.

  Tambahkan ke produk yang diinginkan
• 

  Seri PS

  Soket controller seri PS digunakan dengan perangkat kontrol tipe plug Autonics dan menyediakan daya tahan dan konduktivitas listrik yang tinggi. Soket 8-pin tersedia dalam pemasangan standar, DIN/rail/panel, dan tipe pemasangan DIN rail mini dan soket 11-pin tersedia dalam tipe pemasangan standar dan DIN rail/panel.

  Tambahkan ke produk yang diinginkan