BMS2M-MDT-P - Side Sensing Type Photoelectric Sensors

Data sheet Print

Data sheet

Sensing type	Retroreflective type
Sensing distance	2m(MS-2)
Sensing target	Opaque material of min. Ø60mm
Light source	Infrared LED(940nm)
Response time	Max. 1ms
Power supply	12-24VDC ±10%(ripple P-P: max. 10%)
Current consumption	Max. 45mA
Sensitivity adjustment	Sensitivity adjuster
Operation mode	Light ON/Dark ON(set by control wire)
Control output	PNP open collector
Connection type	Cable type(Ø5, 2m)
Environment_Ambient illumination	Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient temperature	-10 to 60℃, storage: -25 to 70℃
Environment_Ambient humidity	35 to 85% RH, storage: 35 to 85% RH
Material	Case: Acrylonitrile butadiene styrene, Sensing part: Acryl, Bracket: Steel plate cold commercial, Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum
Accessories_Individual	Reflector(MS-2), Adjuster driver
Accessories_Common	Fixing bracket, Bolts, Nuts
Weight	Approx. 110g

※It is mounting distance between sensor and reflector MS-2 and it is the same when MS-5 is used. It is detectable under 0.1m.
When using reflective tapes, the reflectivity will vary by the size of the tape. Please refer to the “▣ Reflectivity By Reflective Tape Model”
table before using the tapes.
※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.
※The weight includes packaging. The weight in parenthesis is for unit only.

Used together with

• 

  PA10 Series

  The PA10 series sensor controllers offer high performance control with various operation modes. The PA10 series features high-speed output response and convenient installation with both DIN rail and panel mount options. The PA10 series is available in general-purpose type, 2-channel type, and high performance type models.

  Add to interested product(s)