Log-in/Create account
India
Elevator Industry | Autonics india
MD5-HD14 - 5-Phase Stepper Motor Drivers
* Image may differMD5-HD14
- Operation method : Bipolar constant current pentagon drive
- Applied Motor : 5-phase stepper motor
- Resolution : FULL STEP(1-division), HALF STEP(2-division), Micro STEP(4, 5, 8, 10, 16, 20, 25, 40, 50, 80, 100, 125, 200, 250-division)
- Power supply : 20-35VDC
- Max. Run Current : 1.4A/Phase
Data sheet Print
| Operation method | Bipolar constant current pentagon drive |
|---|---|
| Applied Motor | 5-phase stepper motor |
| Resolution | FULL STEP(1-division), HALF STEP(2-division), Micro STEP(4, 5, 8, 10, 16, 20, 25, 40, 50, 80, 100, 125, 200, 250-division) |
| Power supply | 20-35VDC |
| Max. Run Current | 1.4A/Phase |
| Max. Current Consumption | 3A |
| Output | Zero point excitation |
| Number Of Axes | 1-axis |
| Input pulse characteristic_pulse width | Min. 1㎲(CW, CCW), Min. 1ms(HOLD OFF) |
| Input pulse characteristic_Duty Rate | 50%(CW, CCW) |
| Input pulse characteristic_Rising/Falling time | Below 130ns(CW, CCW) |
| Input pulse characteristic_Pulse input voltage | [H]: 4-8VDC , [L]: 0-0.5VDC |
| Input pulse characteristic_pulse input current | 7.5-14mA(CW, CCW), 10-16mA(HOLD OFF, DIVISION SELECTION, ZERO OUT) |
| Input pulse characteristic_Max. input pulse freq | Max. 500kHz(CW, CCW) |
| Environment_Ambient temperature | 0 to 40℃, storage: -10 to 60℃ |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
| Weight | Approx. 327.5g(approx. 220g) |
※Since torque characteristics are improved but the driver temperature rises with the 30VDC power supply, the driver should be installed at the well ventilated environment. Torque is variable by power supply.
※Max. current consumption: Based on the ambient temperature 25℃, ambient humidity 55%RH.
※RUN current varies depending on the input RUN frequency, and the max. instantaneous RUN current varies also.
※Max. input pulse frequency is max. frequency to be input and is not same as max. pull-out frequency or max. slewing frequency.
※The weight includes packaging. The weight in parenthesis is for unit only.
※Environment resistance is rated at no freezing or condensation.
Downloads
- No search results
Used together with
BESTAK Series
The AK series shaft type 5-phase stepper motors are compact and lightweight and offer high-speed, high-accuracy, and high torque motion control. The AK series motors also offer great cost efficiency with its low, economical prices and are available in various frame sizes.
PMC-1HS/2HS Series
The PMC-1HS/2HS series high-speed programmable motion controllers are stand-alone controllers capable of 1 or 2-axis control. The controllers also feature high-speed processing up to 4 Mpps and 4 operation modes (scan, continuous, index, program). 64 steps of programming is possible with a combination of 12 control commands. Operation programming, parameter configuration and editing can be done easily with the dedicated software.