Log-in/Create account
PSQ-C01C-R1/8 - Dual Digital Display Pressure Sensors
* Image may differPSQ-C01C-R1/8
- Applicable fluid : (Pneumatic type) Air, Non-corrosive gas
- Pressure port direction : Rear fitting
- Pressure port : R1/8
- Connection type : Connector type(connector type cable: 2m)
- Pressure type : Compound pressure
- Control output : Select one at parameter setting
NPN open collector output
PNP open collector output - Power supply : 12-24VDC
±10%(ripple P-P: max. 10%) - Current consumption : Max. 50mA
- Protection structure : IP40
Data sheet Print
| Applicable fluid | (Pneumatic type) Air, Non-corrosive gas |
|---|---|
| Pressure port direction | Rear fitting |
| Pressure port | R1/8 |
| Connection type | Connector type(connector type cable: 2m) |
| Pressure type | Compound pressure |
| Rated pressure range | -100.0 to 100.0kPa |
| Display pressure unit | MPa, kPa, kgf/cm², bar, psi, mmHg, inHg, mmH₂O |
| Control output | Select one at parameter setting NPN open collector output PNP open collector output |
| Power supply | 12-24VDC ±10%(ripple P-P: max. 10%) |
| Current consumption | Max. 50mA |
| Protection structure | IP40 |
| Control output_Hysteresis | Min. display interval |
| Control output_Repeat error | ±0.2% F.S. ±Min. display interval |
| Control output_Response time | Select one: 2.5ms, 5ms, 10ms, 25ms, 50ms, 100ms, 250ms, 500ms, 1,000ms, 5,000ms |
| Environment_Ambient temperature | -10 to 50℃, storage: -20 to 60℃ |
| Environment_Ambient humidity | 30 to 80% RH, storage: 30 to 80% RH |
| Material | Front case: polycarbonate, Rear case: Polybutylene terephthalate + glass 15%, Pressure port: stainless steel 303 |
| Weight | Approx. 165g(approx. 80g) |
※In hysteresis output mode, it is variable.
※Select one between analog output (voltage or current) and external input.
※The weight includes packaging. The weight in parenthesis is for unit only.
※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.
※Sold separately: Front cover (PSO-P01), Panel bracket (PSO-B02), M5 gender (PSO-Z01)
Downloads
- No search results
Used together with
AFE Series
The AFE series sensor connector terminal blocks can be used to connect Autonics CNE series sensor connectors to save installation time and work. Additional wire stripping or tools are not required. The compact size allows space saving installation. NPN/PNP selection is possible using the NPN/PNP selection switch.
CNE Series
The CNE series sensor connectors can significantly reduce installation work and maintenance time. With a wide range of connectors compatible with diverse cables and connection wiring, the sensor connectors help raise the productivity of industrial systems by making wiring work more convenient and efficient..