PRFAT30-10DO-V
- Sensing side diameter : 30mm
- Sensing distance : 10mm
- Hysteresis(distance) : Max. 15% of sensing distance
- Standard sensing target : 54×54×1mm(iron)
- Response frequency : 50Hz
Data sheet Print
Sensing side diameter | 30mm |
---|---|
Sensing distance | 10mm |
Hysteresis(distance) | Max. 15% of sensing distance |
Standard sensing target | 54×54×1mm(iron) |
Response frequency | 50Hz |
Indicator | Operation indicator (red LED) |
Weight | Approx. 225g(approx. 170g) |
Power supply | 12 - 24 VDC@(=)(ripple P-P: ≤ 10 %), operating voltage: 10 - 30 VDC@(=) |
Current specification | Leakage current: Max. 0.8mA |
Control output | 3 to 100 mA |
Residual voltage | Max. 3.5V |
Protection circuit | Surge protection circuit, output short over current protection circuit, reverse polarity protection circuit |
Insulation resistance | ≥ 50 MΩ (500 VDC@(=) megger) |
Dielectric strength | Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute |
Vibration | 1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours |
Shock | 1,000 m/s² (≈ 100 G) in each X, Y, Z direction for 10 times |
Environment_Ambient temperature | -25 to 70℃, storage: -25 to 70℃ |
Environment_Ambient humidity | 35 to 95% RH, storage: 35 to 95% RH |
Protection structure | IP67(IEC standard) |
Connection | Cable type |
Connector type | M12 Connector |
Material | Case / Nut: stainless steel 303 (SUS303, PTFE coated), washer: stainless steel 304 (SUS304), sensing side: stainless steel 303 (SUS303, PTFE coated) |
※When using the nut which is not SUS303 material such as brass, the sensing distance is variable.※The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard sensing target, 1/2 of the sensing distance for the distance.※Option is 5m.※The weight includes packaging. The weight in parenthesis is for unit only.※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.
3D Viewer
* You can check out the 3D Viewer by the CAD button under the product image.
PR materials
Technical dataView more
- No search results
-
- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}
Used together with
-
BEST
ABL Series
The ABL series screwless relay terminal blocks are ideal for operating various loads using output signals from PLCs featuring simple and easy connection between circuits. Relay terminal blocks offer space-saving design with 5 mm terminal pitch and stable connection with screwless push-in type for easy maintenance. Users can switch between independent or load common output options and NPN / PNP input options using jumper bars.
-
BEST
SPB Series
The SPB series switching mode power supplies offer high power conversion efficiency and stable power supply with low noise and ripple and minimal heat generation. The switching mode power supplies can be easily clipped onto DIN rails or mounted using screws. The slim and compact design also allows space-saving installation. The series also features various safety and user-friendly features including terminal protection covers (SPB-060/120/180/240) and rising clamp type terminals (SPB-015/030). Various output power models are available for application in diverse environments.