BJX3M-PDT - Compact Long Distance Photoelectric Sensors

Data sheet Print

Data sheet

Sensing type	Retroreflective type(built-in polarizing filter)
Sensing distance	3m
Sensing target	Opaque material of min. Ø75mm
Light source	Red LED(660nm)
Response time	Max. 1ms
Power supply	10-30VDC ±10%(ripple P-P: max. 10%)
Current consumption	Max. 30mA
Sensitivity adjustment	Sensitivity adjuster
Operation mode	Light ON/Dark ON(set by switch)
Control output	NPN open collector
Connection type	Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m) (AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm)
Environment_Ambient illumination	Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient temperature	-25 to 60℃, storage: -40 to 70℃
Protection structure	IP65(IEC standard)
Environment_Ambient humidity	35 to 85% RH, storage: 35 to 85% RH
Material	ㆍCase: polycarbonate ㆍLED CAP: polycarbonate ㆍLens, Lens cover: polymethyl methacrylate
Accessories_Common	Mounting bracket, M3 bolt: 2, adjustment screwdriver
Accessories_Individual	Reflector(MS-2A)
Weight	Approx. 115g(approx. 50g)

※The sensing distance is specifi ed with using the MS-2A refl ector. The distance between the sensor and the refl ector should be set over 0.1m. When using refl ective tapes, the refl ectivity will vary by size of the tape. Please refer to the catalog or web site.
※UL approved surrounding air temperature 40℃
※M8 connector cable is sold separately.(AWG22, core diameter: 0.08mm, number of cores: 60, insulator out diameter: Ø1.25mm)
※Accessory: Cable type includes bracket A and connector type includes bracket B.
※The weight includes packaging. The weight in parenthesis is for unit only.
※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.