ABL-L04R6-UY - Relay Terminal Blocks (Screwless Push-In Type)

Data sheet Print

Data sheet

Rated voltage	24VDC ±10%
Rated load voltage & current	250VAC~ 50/60Hz 5A, 30VDC 5A
Current consumption	≤20mA
Applied relay	G6B-1174P-FD-US[OMRON]
Number of relay points	4-point
Terminal type	Screwless
Terminal pitch	10.2mm
Indicator	Operation indicator: Blue LED
Applicable cable_Solid wire	Ø0.6 to Ø1.25mm(60℃ only)
Applicable cable_Stranded wire	AWG22-16(0.3~1.25mm²)(60℃ only)
Insulation resistance	≥ 1,000 MΩ (500 VDC megger)
Dielectric strength_Between coil-contacts	3,000VAC 50/60Hz for 1 minute
Dielectric strength_Between same contacts	300VAC 50/60Hz for 1 minute
Environment_Ambient temperature	-15 to 55℃, storage: -25 to 65℃
Environment_Ambient humidity	35 to 85% RH, storage: 35 to 85% RH
Material	Terminal block: polyamide 66, conducting plate: brass, case&base: modified polyphenylene oxide
Accessories	Jumper bar: 1
Protection structure	IP20(IEC standard)
Weight	Approx. 144g(approx. 88g)

※This is for load protection and it is recommend to use at the inductive load.
※Relay load capacity for resistive load.
Please connect to a load using the same power supply. Connecting to a load from a different power supply may cause safety issues.
※The current consumption including LED current by one relay.
※When using stranded wire, use End Sleeve (ferrule terminal) crimp terminals.
※The weight includes packaging. The weight in parenthesis is for unit only.
※Environment resistance is rated at no freezing or condensation.