MD5-ND14 - 5-Phase Stepper Motor Drivers

MD5-ND14
- Operation method : Bipolar constant current pentagon drive
- Applied Motor : 5-phase stepper motor
- Resolution : FULL STEP(1-division), HALF STEP(2-division)
- Power supply : 20-35VDC
- Max. Run Current : 1.5A/Phase
Data sheet Print
Operation method | Bipolar constant current pentagon drive |
---|---|
Applied Motor | 5-phase stepper motor |
Resolution | FULL STEP(1-division), HALF STEP(2-division) |
Power supply | 20-35VDC |
Max. Run Current | 1.5A/Phase |
Max. Current Consumption | 3A |
Number Of Axes | 1-axis |
Input pulse characteristic_pulse width | Min. 10㎲(CW, CCW), Min. 1ms(HOLD OFF) |
Input pulse characteristic_Duty Rate | 50%(CW, CCW) |
Input pulse characteristic_Rising/Falling time | Below 130ns(CW, CCW) |
Input pulse characteristic_Pulse input voltage | [H]: 4-8VDC |
Input pulse characteristic_pulse input current | 7.5-14mA(CW, CCW), 10-16mA(HOLD OFF) |
Input pulse characteristic_Max. input pulse freq | Max. 50kHz(CW, CCW) |
Environment_Ambient temperature | 0 to 40℃, storage: -10 to 60℃ |
Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
Weight | Approx. 183g (approx. 130g) |
※When using over 30VDC power supply, torque characteristics are improved but the driver temperature raise. The unit should be installed at the well ventilation environment.
※Max. current consumption: Based on ambient temperature 25℃, ambient humidity 55%RH.
※RUN current varies depending on the input RUN frequency and max. RUN current at the moment varies also varies depending on the load.
※In case of MD5-HF14-AO, MD5-ND14, there are no DIVISION SELECTION, ZERO OUT function.
※Max. input pulse frequency is max. frequency to be input and is not same as max. pull-out frequency or max. slewing frequency.
※The weight includes packaging. The weight in parenthesis is for unit only.
※Environment resistance is rated at no freezing or condensation.
Downloads
- No search results
Used together with
- BEST
AK Series
The AK series shaft type 5-phase stepper motors are compact and lightweight and offer high-speed, high-accuracy, and high torque motion control. The AK series motors also offer great cost efficiency with its low, economical prices and are available in various frame sizes.
PMC-1HS/2HS Series
The PMC-1HS/2HS series high-speed programmable motion controllers are stand-alone controllers capable of 1 or 2-axis control. The controllers also feature high-speed processing up to 4 Mpps and 4 operation modes (scan, continuous, index, program). 64 steps of programming is possible with a combination of 12 control commands. Operation programming, parameter configuration and editing can be done easily with the dedicated software.