LSE-4A5R2 - 2D 4-Channel Laser Scanners (Discontinued)

Data sheet Print

Data sheet

Power supply	24VDC
Allowable voltage range	80 to 120% of rated voltage
Emitting property_Laser class	CLASS 1
Emitting property_Wavelength band	905nm
Emitting property_Max. pulse output power	75W
Angular resolution	0.4°
Aperture angle	90°
Object reflectivity	Min. 2%
Scanning mode	Motion and presence
Monitoring zone	0.3×0.3m to 5.6×5.6m (object reflectivity: at approx. 10%)
Min. size of the scanning target	ㆍAt detection distance of 3m: approx. W2.1×H2.1×L2.1cm ㆍAt detection distance of 5m: approx. W3.5×H3.5×L3.5cm ㆍObject reflectivity: 90% (at Kodak Gray card R-27, white)
Power consumption	Max. 8W
Response time	Typ. 20 to 80ms+monitoring time
Input	Photocoupler input: 1 (output test mode) ㆍ[H]: min. 8VDC (max. 30VDC ), [L]: max. 3VDC ㆍ [H] operates as output test mode and outputs obstacle detection output and error status output
Output	PhotoMOS relay output: 2 (obstacle detection output, error status output) ㆍGalvanic isolation, non-polarity ㆍ30VDC / 24VAC, max. DC80mA (resistive load) ㆍOutput resistance: 30Ω ㆍSwitching time: t on=5ms, t off=5ms
Installation Laser scanner angle	-45 , 0 , 45°
Installation Bracket rotation angle	-5 to 5°
Installation Bracket tilt angle	-3 to 3°
Front contamination	Normal operation with max. 30% contamination of one material
Communication interface	Ethernet
Life expectancy	Max. 6.8 years (60,000 hours)
Insulation resistance	Over 5MΩ (at 500VDC megger)
Dielectric strength	500VAC 50/60Hz for 1 minute
Vibration	Max. 2G (18.7m/s²)
Shock	30G/18ms
Environment_Ambient illumination	Sunlight: max. 100,000lx
Environment_Ambient temperature	-30 to 60℃
Environment_Ambient humidity	0 to 95%RH, storage: 0 to 95%RH
Material	Polycarbonate
Protection structure	IP67(IEC standard)
Cable_Power, I/O	Ø5mm, 8-wire, 5m (AWG 26, core diameter: 0.16mm, number of cores: 7, insulator out diameter: Ø1mm)
Cable_Ethernet	Ø5mm, 4-wire, 3m, shielded cable (AWG 26, core diameter: 0.16mm, number of cores: 7, insulator out diameter: Ø1mm)
Accessories	Bracket, M2.6×L6 Tapping screw (for fixing bracket rotation angle): 2, 3mm allen wrench
Component_PC program	atLidar (laser scanner program)
Korean Railway Standards	KRS SG 0068
Weight	Approx. 0.96kg(approx 0.58kg)

※ The monitoring zone may be changed by the sensitivity level setting.
※ 'Monitoring time' is able to be set with the remote control or atLidar.
※ Installation angle: Please refer to '▣ Installation'.
※ Installation Bracket rotation angle: It represents alignment range of laser scanner and is able to be set within the range from -5 to 5 based on the mark line.
※ Communication interface: It is used for setting sensor positions, parameters, and monitoring status information.
※ Ambient temperature in power supplied status is -30 to 60℃ and in power cut status is -10 to 60℃.
※ The weight includes packaging. The weight in parenthesis is for unit only.
※ The temperature or humidity mentioned in Environment indicates a non freezing or condensation.

Used together with

• 

  atLidar

  Laser scanner software atLiDAR is a dedicated software for Autonics laser scanners. Users can easily set up laser scanners and set parameters with the program. The software also allows real time status monitoring and data log monitoring with graphical user interface. The laser scanners are connected via Ethernet communication.

  Add to interested product(s)