Recommended browsers

Please use Internet Explorer 10 or above for optimal viewing experience on the Autonics website.

When using Internet Explorer 10 or earlier, 3D CAD viewer and screen layout may not be displayed normally.
For ease of use the site, we recommend upgrading to a modern browser.

browser img
model * Image may differ
CAD

BS5-Y2M

  • Sensing type : Through-beam type
  • Hysteresis(distance) : ≤0.05mm
  • Response time : Light ON: Max. 20㎲, Dark ON: Max. 100㎲
  • Control output : NPN open collector
  • Connection : Connector type
certmark certmark certmark certmark

Data sheet Print

Data sheet
Sensing type Through-beam type
Sensing distance 5mm
Sensing target Opaque
Min. sensing target ≥Ø0.8mm×2mm
Hysteresis(distance) ≤0.05mm
Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲
Response frequency 2kHz
Light source Infrared LED
Peak emission wavelength 940nm
Operation mode Light ON/Dark ON(set by control wire)
Indicator Operation indicator (red LED)
Weight Approx. 30g
Power supply 5-24VDC @(=) ±10%(ripple P-P : max. 10%)
Current consumption Max. 30mA
Control output NPN open collector
Load voltage ≤30VDC@(=)
Load current Max. 100mA
Residual voltage NPN: ≤1.2VDC@(=), PNP: ≤ 1.2VDC@(=)
Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit
Insulation resistance ≥20 MΩ (250 VDC@(=) megger)
Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC@(=)
Dielectric strength 1,000VAC 50/60Hz for 1 minute
Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours
Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times
Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination)
Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃
Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH
Protection structure IP50 (IEC standard)
Connection Connector type
Material Case: PBT, Sensing part: PC

3D Viewer

* You can check out the 3D Viewer by the CAD button under the product image.

PR materials

PR materials can be downloaded without login.
  • {{result.bbsCtgryNm}}
    {{result.nttSj}}
    Language selection
    Downloads Preview

Technical dataView more

3D drawings for each detailed model can be checked and downloaded from the model page at the bottom.
  • No search results

Recently viewed product(s)

View more

There are no recently viewed product(s)

Interested product(s)

View more

Compare products

View more

Download history

View more

Product Inquiry