Log-in/Create account
USA
* Image may differ
ADS-SE1
- Sensing type : Through-beam type
- Sensing distance : 0 to 10m
- Light source : Infrared LED(850nm modulated)
- Power supply : 12-24VAC~ ±10% 50/60Hz12-24VDC @(=)
- Current consumption and Power consumption : Current Consumption: Max. 2VA, Power Consumption: Max. 50mA
- Control output : Relay(SPST(1a))
Data sheet Print
| Sensing type | Through-beam type |
|---|---|
| Sensing distance | 0 to 10m |
| Light source | Infrared LED(850nm modulated) |
| Power supply | 12-24VAC~ ±10% 50/60Hz12-24VDC @(=) |
| Current consumption and Power consumption | Current Consumption: Max. 2VA, Power Consumption: Max. 50mA |
| Control output | Relay(SPST(1a)) |
| Sensing Channel | 1-channel |
| Sensitivity adjustment | Set by button |
| Sensor cable length | 5m |
| Environment_Ambient illumination | Sunlight: Max. 100,000lx(receiver illumination) |
| Environment_Ambient temperature | -20 to 55℃, storage: -25 to 60℃ |
| Protection structure | IP30 |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
| Response time | Approx. 50ms(from light OFF) |
| Output holding time | Approx. 500ms(from light ON) |
| Available sensor set | 1-channel |
| Sensor cable | Ø2.4mm, 1-wire, 5m(AWG26, core diameter: 0.16mm, number of cores: 7, insulator out diameter: Ø1.32mm) |
| Material | Sensor - Holder: Acrylonitrile butadiene styrene, Lens: Polymethyl methacrylate, Lens guide: Polycarbonate, Nut: PolycarbonateController - Housing: Acrylonitrile butadiene styrene, Cover: Acrylonitrile butadiene styrene, Bolt: Steel chromium molybden |
| Accessories | Sensor 1set(ADS-SHP), Fixing bolt(M4×20) for controller: 2 |
| Weight | Approx. 450g(approx. 300g) |
※Do not use Load which is beyond the rated capacity of contact point of Relay.It can cause bad insulation, contact fusion, bad contact, relay breakdown, and fire etc.※The weight includes packaging. The weight in parenthesis is for unit only.※Please purchase 1 set of sensor separately when mounting 2 sets of sensor.※The mounting bracket of sensor (ADS-SB12, ADS-SB10) is sold separately.※It is enable to purchase a controller (ADS-SEC1/2) separately.※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.
3D Viewer
* You can check out the 3D Viewer by the CAD button under the product image.
PR materials
PR materials can be downloaded without login.
Technical dataView more
3D drawings for each detailed model can be checked and downloaded from the model page at the bottom.
- No search results
-
- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}
