BH4M-PDT
- Sensing type : Retroreflective type(built-in polarizing filter)
- Sensing distance : 4m(MS-2A)
- Sensing target : Opaque material of min. Ø75mm
- Light source : Red LED(660nm)
- Response time : Max. 1ms
Data sheet Print
Sensing type | Retroreflective type(built-in polarizing filter) |
---|---|
Sensing distance | 4m(MS-2A) |
Sensing target | Opaque material of min. Ø75mm |
Light source | Red LED(660nm) |
Response time | Max. 1ms |
Power supply | 12-24VDC @(=) ±10%(ripple P-P: max. 10%) |
Current consumption | Max. 30mA |
Sensitivity adjustment | Sensitivity adjuster |
Operation mode | Light ON/Dark ON(set by switch) |
Control output | NPN, PNP open collector simultaneous output |
Connection type | Cable type(Ø4, 2.1m) |
Environment_Ambient illumination | Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) |
Environment_Ambient temperature | -25 to 55℃, storage: -40 to 70℃ |
Protection structure | IP67 |
Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
Material | Case: Polycarbonates, LED indicator: Polycarbonates, Sensing part: Polymethyl methacrylate acrylic |
Accessories_Individual | Reflector(MS-2A) |
Accessories_Common | Adjustment screwdriver, fixing bracket, M18 fixing nut, fixing cap, M3 bolt, M3 nut |
Weight | Approx. 140g(Approx. 60g) |
※The sensing distance is specified with using the MS-2A reflector. The distance between the sensor and the reflector should be set over0.1m. When using reflective tapes, the reflectivity will vary by the size of the tape. Please refer to the ‘▣ Reflectivity By Reflective TapeModel’ table before using the tape.※The weight includes packaging. The weight in parenthesis is for unit only.※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.
3D Viewer
* You can check out the 3D Viewer by the CAD button under the product image.
PR materials
Technical dataView more
- No search results
-
- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}
Used together with
-
PA10 Series
The PA10 series sensor controllers offer high performance control with various operation modes. The PA10 series features high-speed output response and convenient installation with both DIN rail and panel mount options. The PA10 series is available in general-purpose type, 2-channel type, and high performance type models.
-
BEST
SPB Series
The SPB series switching mode power supplies offer high power conversion efficiency and stable power supply with low noise and ripple and minimal heat generation. The switching mode power supplies can be easily clipped onto DIN rails or mounted using screws. The slim and compact design also allows space-saving installation. The series also features various safety and user-friendly features including terminal protection covers (SPB-060/120/180/240) and rising clamp type terminals (SPB-015/030). Various output power models are available for application in diverse environments.