BH4M-PDT - Front/Side Mount Photoelectric Sensors

Data sheet Print

Data sheet

Sensing type	Retroreflective type(built-in polarizing filter)
Sensing distance	4m(MS-2A)
Sensing target	Opaque material of min. Ø75mm
Light source	Red LED(660nm)
Response time	Max. 1ms
Power supply	12-24VDC ±10%(ripple P-P: max. 10%)
Current consumption	Max. 30mA
Sensitivity adjustment	Sensitivity adjuster
Operation mode	Light ON/Dark ON(set by switch)
Control output	NPN, PNP open collector simultaneous output
Connection type	Cable type(Ø4, 2.1m)
Environment_Ambient illumination	Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient temperature	-25 to 55℃, storage: -40 to 70℃
Protection structure	IP67
Environment_Ambient humidity	35 to 85% RH, storage: 35 to 85% RH
Material	Case: Polycarbonates, LED indicator: Polycarbonates, Sensing part: Polymethyl methacrylate acrylic
Accessories_Individual	Reflector(MS-2A)
Accessories_Common	Adjustment screwdriver, fixing bracket, M18 fixing nut, fixing cap, M3 bolt, M3 nut
Weight	Approx. 140g(Approx. 60g)

※The sensing distance is specified with using the MS-2A reflector. The distance between the sensor and the reflector should be set over
0.1m. When using reflective tapes, the reflectivity will vary by the size of the tape. Please refer to the ‘▣ Reflectivity By Reflective Tape
Model’ table before using the tape.
※The weight includes packaging. The weight in parenthesis is for unit only.
※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.

Used together with

• 

  PA10 Series

  The PA10 series sensor controllers offer high performance control with various operation modes. The PA10 series features high-speed output response and convenient installation with both DIN rail and panel mount options. The PA10 series is available in general-purpose type, 2-channel type, and high performance type models.

  Add to interested product(s)